Thom and Edna Dickieson, Independant Amsoil Dealers, North Bay, ON (705) 476-9815
ORDER AMSOIL Synthetic Lubricants
A Guide to help you to know what product is applicable to which vehicle. Provides product requirements for specific motor oil, gear lube, filters, grease etc. This guide works for cars 25 years old or newer.
AUTHORIZED AMSOIL DEALER WEBSITE
Synthetic oil dealer
Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB
Ultimate protection for hard-driven, high performance vehicles.
Dramatically reduces friction and wear for improved performance. Excels
at both high- and low-temperature performance. Outperforms other
conventional and synthetic greases.
| The AMSOIL Online Product Application Guide gives you access to 25 years of vehicle data. |
|
Applications
AMSOIL Series 2000 Synthetic Lithium Complex
Racing Grease meets the highest performance standards of the National
Lubricating Grease Institute, GC for wheel bearing applications and LB
for chassis applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an
extreme-pressure multi-purpose grease formulated for
high-temperature/high-speed applications. Yet, it excels in the
protection of low-speed bearings, a job usually reserved for heavy-duty
products. Components get the load bearing capacity of a heavy-duty
grease without sacrificing the high-temperature protection of a
multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes the Ford
Film Strength Endurance Test with a 16 point margin (see graph). Most
nonsolid-fortified racing greases, synthetic or conventional, do not
pass. AMSOIL Series 2000 Racing Grease keeps greased components in
like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high
Viscosity Index synthetic base oil with a top-quality lithium complex
thickener, known for its extraordinary performance in temperature
extremes. AMSOIL Series 2000 Racing Grease offers excellent
low-temperature pumpability and high-temperature consistency for
dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease’s excellent
oxidation resistance and robust package of oxidation inhibitors prevent
grease breakdown and component surface damage in the highly oxidizing
conditions associated with high temperature operations.
Friction Reduction
AMSOIL Series 2000 Racing Grease maximizes power
through-put and fuel efficiency by minimizing friction. The extra power
given by Series 2000 improves acceleration and top-end speed.
Washout Resistance and Corrosion
Inhibition
AMSOIL Series 2000 Racing Grease resists water
wash out and inhibits rust and other forms of corrosion.
| Typical Technical Properties | ||
| AMSOIL Synthetic Lithium Complex Racing Grease |
NLGI GC-LB |
Series 2000 Racing Grease |
| Thickener | NR* | Lithium Complex |
| NLGI Consistency Grade | NR* | 2 EP |
| NLGI Performance Grade | NR* | GC-LB |
| Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes | 220 - 340 | 265 - 295 |
| Dropping Point (ASTM D-566) °C [77° F] | 220 [428] | 285 [545] |
| Water Washout (ASTM D-1264) 79° C [175° F] % loss | 15 max | 5.1 |
| Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss | 10 max | 2.8 |
| Rust Protection (ASTM D-1743) | pass | pass |
| Timken OK Load Test (ASTM D-2509), lbs. | NR* | 60 |
| Fortified with Moly Compound | NR* | no |
| Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm | 0.9 max | 0.32 |
| Compatibility with other greases | NR* | excellent |
| Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf | 200 min | 400 |
| Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf | 30 min | 65 |
| High Temperature Life (ASTM D-3527) hours | 80 min | 300 |
| Fretting Wear (ASTM D-4170)* mg | 10 max | 3.4 |
| Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC | -5 to +30 | 21.6 |
| Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB | 0 to +30 | 9.88 |
| Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC | +2 to -15 | -3 |
| Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, LB | 0 to -10 | -6 |
| Leakage (ASTM D-4290), G* | 10 max | 6.0 |
| Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F] | 15.5 | 2.3 |
| Water Spray Off (ASTM D-4049), % max | NR* | 22.7 |
| * NR: Not Required for NLGI GC or LB labeling | ||
For Assistance placing your order call:
Toll Free 1-800-777-7094
and quote
ZO # 29306
To Place Orders Online
How to BUY AMSOIL:
For USA & Canada
To Order by phone from AMSOIL Headquarters
7AM-5PM Central
Toll-Free at:
1-800-777-7094
Give Operator ZO # 29306